This project was more difficult than I expected so you’ll see pictures of the ornament I made but the directions will modify the project to make it simpler.
Supplied Needed:
White Tissue Paper
Crayons
White Glue
Water
Container with a pour-spout
Paintbrush
Glass Ornament
Glitter
Scissors
Tweezers
Draw a pattern onto the tissue paper using your crayons. I drew music notes but you would be better off drawing one larger picture like a Christmas tree or a bell. Cut out the picture. You should cut away as much of the excess tissue paper as possible.
Remove the metal cap from your glass ornament and set it aside. Paint a thin coat of white glue onto the inside of the ornament where you would like the image to appear.
Push the picture into the ornament with your tweezers. Stick it to the glue so the drawing shows through the glass. Use the back of your paintbrush the secure the picture to the ornament. Make the image as smooth as possible.
In your container, mix 1/3 white glue with 2/3 water. Pour the mixture into the ornament and shake it so the glue coats the inside. Dump out the extra glue mixture.
Pour some glitter into the ornament and shake. The glitter will stick to the inside of the ornament. Dump out the extra glitter.
Replace the metal cap and tie some ribbon or attach a hanger to your ornament.
Supplied Needed:
White Tissue Paper
Crayons
White Glue
Water
Container with a pour-spout
Paintbrush
Glass Ornament
Glitter
Scissors
Tweezers
Draw a pattern onto the tissue paper using your crayons. I drew music notes but you would be better off drawing one larger picture like a Christmas tree or a bell. Cut out the picture. You should cut away as much of the excess tissue paper as possible.
Remove the metal cap from your glass ornament and set it aside. Paint a thin coat of white glue onto the inside of the ornament where you would like the image to appear.Push the picture into the ornament with your tweezers. Stick it to the glue so the drawing shows through the glass. Use the back of your paintbrush the secure the picture to the ornament. Make the image as smooth as possible.
In your container, mix 1/3 white glue with 2/3 water. Pour the mixture into the ornament and shake it so the glue coats the inside. Dump out the extra glue mixture.
Pour some glitter into the ornament and shake. The glitter will stick to the inside of the ornament. Dump out the extra glitter.
Replace the metal cap and tie some ribbon or attach a hanger to your ornament.
No comments:
Post a Comment